In vitro anti-venom potential of various solvent based leaf extracts of Andrographis serpyllifolia (Rottler ex Vahl) Wight against Naja naja and Daboia russelli.

ETHNOPHARMACOLOGICAL RELEVANCE: Snake bite is a major occupational hazard in tropical and subtropical countries including India as per the World Health Organization. Naja naja (Indian cobra) and Daboia russelli (Russell's viper) are the two poisonous snakes commonly associated with human mortality in India. Andrographis serpyllifolia (Rottler ex Vahl) Wight has been documented in ethnobotanical records as a plant possessing potent anti-snake venom activity. AIM OF THE STUDY: The present study is aimed for systematic evaluation of in vitro anti-venom potential of various solvent based leaf extracts of A. serpyllifolia against toxic venom enzymes of Naja naja and Daboia russelli. MATERIALS AND METHODS: Different solvent based leaf extracts of A. serpyllifolia were tested against the snake venoms of Naja naja and Daboia russelli obtained from Irula Snake Catchers Industrial Co-operative Society Limited, Kancheepuram, Tamil nadu, India. Three different in vitro neutralization assays such as indirect hemolysis, procoagulent and lytic activities and seven in vitro enzyme inhibition assays such as protease, acetylcholinesterase, phosphomonoesterase, phosphodiesterase, 5'nucleotidase, phospholipase A2, hyaluronidase and post synaptic acetylcholine receptor binding activity were carried out according to standard protocols. The results were analyzed using the standard ANOVA procedures. RESULTS: Among various solvent based leaf extracts of A. serpyllifolia tested, aqueous extract showed maximum neutralizing and inhibitory activities against Naja naja and Daboia russelli venoms. CONCLUSIONS: The various in vitro enzymatic studies reveal that the aqueous leaf extract of A. serpyllifolia plant could inhibit most of the toxic enzymes of the Naja naja and Daboia russelli venoms which could be further confirmed by in vivo studies.

A Novel Freeze-Drying-Free Strategy to Fabricate a Biobased Tough Aerogel for Separation of Oil/Water Mixtures.

Renewable biobased porous aerogels with excellent biodegradability have versatile applications in oil/water separation, catalysis, and tissue engineering. However, processing of the porous matrix is challenging due to the high energy consumption and low efficiency from the fabrication procedures, such as freeze-drying or critical-drying of the hydrogel, which need to be improved. In the present study, natural amphiphilic oligomer shellac secreted by the lac Kerriar Lacca insect was employed to fabricate the porous template, which could self-assemble into a continuous rigid network with a hydrophobic core. Because of the hydrophobic core, the hydrated shellac network could be directly dried without collapse by the ambient air. The air-drying shellac aerogel presented a great mechanical property. The silane-coating treatment converted this shellac aerogel into a hydrophobic material that absorbed various organic solvents and oils. Also, this silane-coated shellac aerogel also could remove organic solvent or oil from the bottom or surface of the water. Notably, the saturable aerogel rapidly degraded in pH 14 and released the solvent absorbed by this matrix. This porous and hydrophobic matrix also could be applied as a filter that could connect with a vacuum pump to assemble a device for continuous collecting of oil from water. It also has great potential to be employed as a high-efficiency strategy to treat large scale oil spill issues. A new porous template composed of natural resin secreted by the insect was fabricated, and the whole fabrication process was green, low-cost, and energy saving. The surface of this template could be modified further to effectuate other processes, such as catalysis, heavy metal absorption, and tissue proliferation.

Clearance of solvents and small molecule impurities in antibody drug conjugates via ultrafiltration and diafiltration operation.

Ultrafiltration and diafiltration (UF/DF) processes by tangential flow filtration (TFF) are frequently used for removal of solvents and small molecule impurities and for buffer exchange for biopharmaceutical products. Antibody-drug conjugates (ADCs) as an important class of biological therapeutics, carry unique solvents and small molecule impurities into the final UF/DF step as compared to standard antibody preparation. The production process of ADCs involves multiple chemical steps, for example, reduction and conjugation. The clearance of these solvents and small molecules by UF/DF, specifically the DF step, has been assessed and described herein. The rates of clearance for all the impurities in this study are close to the ideal clearance with no apparent interaction with either the protein or the TFF membrane and system. The effect of process variables during DF, such as pH, temperature, membrane loading, transmembrane pressure, and cross flow rate, has also been evaluated and found to have minimal impact on the clearance rate. These results demonstrate efficient clearance of solvents and small molecule impurities related to the ADC process by the DF process and provide a general data package to facilitate risk assessments based on the sieving factors and program specific needs.

A Case Study of Natural Attenuation of Chlorinated Solvents Under Unstable Groundwater Conditions in Takahata, Japan.

The natural attenuation behavior of chlorinated solvents and their risks to human health at a contaminated groundwater site in Takahata, Japan, were investigated. It was found that volatile organic compound (VOC) concentrations gradually decreased via two attenuation mechanisms, namely dilution and biodegradation. It was estimated that the VOC concentrations will be below the Japanese limits within 30 years after stopping the active remediation in 2003, which suggests that there is a high possibility that monitored natural attenuation can be adopted as the clean-up method at this contaminated site. The risk levels of VOCs at the present time are much lower than those at the time when the contamination was discovered. Vinyl chloride still presents a risk in some wells, and there were occasional unexpected increases in the risk levels of tetrachloroethylene, trichloroethylene, and cis-1,2-dichloloethylene, which means that continuous monitoring of the groundwater is necessary for forecasting risk levels.

Partial Purification, Identification, and Quantitation of Antioxidants from Wild Rice (Zizania latifolia).

To provide further insights into the potential health-promoting antioxidants from wild rice (Zizania latifolia), which is an abundant but underutilized whole grain resource in East Asia, a partial purification based on D101 macroporous resin was carried out for the purification and enrichment of the antioxidants from the bioactive ethanol extracts of wild rice. On that basis, 34 phenolic compounds in the antioxidant fractions were identified by a high-performance liquid chromatography-linear ion trap quadrupole-Orbitrap-mass spectrometry (HPLC-LTQ-Orbitrap-MSn). The results suggested that phenolic acids could be enriched in the 10% ethanol-eluted fraction whereas flavonoids (including procyanidins and flavonoid glycosides) could be enriched in 20⁻30% ethanol-eluted fractions. A quantitative analysis determined by the multiple reaction monitoring mode of the ultra-performance liquid chromatography-triple quadrupole-tandem mass spectrometry (UPLC-QqQ-MS/MS) revealed a high content of procyanidins in wild rice. Compared with phenolic acids, flavonoids may contribute more to the potent antioxidant activity of wild rice. This is the first study on the antioxidants from wild rice Z. latifolia. These findings provide novel information on the functional components of wild rice, and will be of value to further research and development on Z. latifolia.

What are the effects of soil treatment procedures (sterilization by γ-irradiation and solvent-assisted spiking) on DDE bioaccumulation by earthworms?

Ionizing γ-irradiation and solvent-assisted spiking are frequently applied to eliminate microbial activity and to induce hydrophobic organic compounds (HOCs) into soil, respectively, when studying the accumulation of chemicals in terrestrial organisms. However, the side-effects that may arise from these treatments on soil-HOC interaction and, subsequently, the kinetics and extents of bioaccumulation are not thoroughly understood. To this end, the accumulation of 1,1-dichloro-2,2-bis(p-chlorophenyl)etylene (p,p'-DDE) by Eisenia andrei was studied in sterilized or unsterilized and freshly spiked (FS) or historically contaminated (HC) soils in parallel with an analysis of aliphatic and hydrophilic soil organic matter (SOM) moieties using mid-infrared diffuse reflectance spectroscopy (DRIFT-S). Irradiation did not impart significant changes on spectral SOM descriptors. In contrast, earthworm inhabitation increased the relative presence of aliphatic moieties to a greater extent than hydrophilic ones, reaching or exceeding pre-treatment levels. Overall, effects on SOM chemistry can be ranked as earthworms > spiking > irradiation. Corresponding changes at the bioaccumulation level were observed for the FS soil (i.e., a 27% reduction in bioaccumulation upon sterilization) but not for the HC soil. This implies that in contrast to the interactions between aged p,p'-DDE and sterilized HC soil, the interactions established between freshly added p,p'-DDE and sterilized FS soil were altered by γ-irradiation-induced secondary effects alone or in combination with earthworm inhabitation. Thus, although the soil treatment processes studied here should not drastically impact compound bioaccumulation, they should be considered in mechanistic studies where the qualitative and quantitative aspects of compound-soil (organic matter)-earthworm interactions are at the centre of attention.

In situ downstream strategies for cost-effective bio/surfactant recovery.

Since 60-80% of total costs of production are usually associated with downstream collection, separation, and purification processes, it has become advantageous to investigate how to replace traditional methods with efficient and cost-effective alternative techniques for recovery and purification of biosurfactants. In the traditional techniques, large volumes of organic solvents are usually used for increasing production cost and the overall environmental burden. In addition, traditional production and separation methods typically carried out in batch cultures reduce biosurfactant yields due to product inhibition and lower biosurfactants activity as a result of interaction with the organic solvents used. However, some in situ recovery methods that allow continuous separation of bioproducts from culture broth leading to an improvement in yield production and fermentation efficiency. For biosurfactants commercialization, enhancement of product capacity of the separation methods and the rate of product removal is critical. Recently, interest in the integration of separation methods with a production step as rapid and efficient techniques has been increasing. This review focuses on the technology gains and potentials for the most common methods used in in situ product removal: foam fractionation and ultrafiltration, especially used to recover and purify two well-known biosurfactants: glycolipids (rhamnolipids) and lipopeptides (surfactins).

Thermally enhanced in situ bioremediation of groundwater contaminated with chlorinated solvents - A field test.

In situ bioremediation (ISB) using reductive dechlorination is a widely accepted but relatively slow approach compared to other technologies for the treatment of groundwater contaminated by chlorinated ethenes (CVOCs). Due to the known positive kinetic effect on microbial metabolism, thermal enhancement may be a viable means of accelerating ISB. We tested thermally enhanced ISB in aquifers situated in sandy saprolite and underlying fractured granite. The system comprised pumping, heating and subsequent injection of contaminated groundwater aiming at an aquifer temperature of 20-30°C. A fermentable substrate (whey) was injected in separate batches. The test was monitored using hydrochemical and molecular tools (qPCR and NGS). The addition of the substrate and increase in temperature resulted in a rapid increase in the abundance of reductive dechlorinators (e.g., Dehalococcoides mccartyi, Dehalobacter sp. and functional genes vcrA and bvcA) and a strong increase in CVOC degradation. On day 34, the CVOC concentrations decreased by 87% to 96% in groundwater from the wells most affected by the heating and substrate. On day 103, the CVOC concentrations were below the LOQ resulting in degradation half-lives of 5 to 6days. Neither an increase in biomarkers nor a distinct decrease in the CVOC concentrations was observed in a deep well affected by the heating but not by the substrate. NGS analysis detected Chloroflexi dechlorinating genera (Dehalogenimonas and GIF9 and MSBL5 clades) and other genera capable of anaerobic metabolic degradation of CVOCs. Of these, bacteria of the genera Acetobacterium, Desulfomonile, Geobacter, Sulfurospirillum, Methanosarcina and Methanobacterium were stimulated by the substrate and heating. In contrast, groundwater from the deep well (affected by heating only) hosted representatives of aerobic metabolic and aerobic cometabolic CVOC degraders. The test results document that heating of the treated aquifer significantly accelerated the treatment process but only in the case of an abundant substrate.

Comparison of the atmospheric- and reduced-pressure HS-SPME strategies for analysis of residual solvents in commercial antibiotics using a steel fiber coated with a multiwalled carbon nanotube/polyaniline nanocomposite.

A low-cost, sensitive and reliable reduced-pressure headspace solid-phase microextraction (HS-SPME) setup was developed and evaluated for direct extraction of residual solvents in commercial antibiotics, followed by determination by gas chromatography with flame ionization detection (GC-FID). A stainless steel narrow wire was made porous and adhesive by platinization by a modified electrophoretic deposition method and coated with a polyaniline/multiwalled carbon nanotube nanocomposite. All experimental variables affecting the extraction efficiency were investigated for both atmospheric-pressure and reduced-pressure conditions. Comparison of the optimal experimental conditions and the results demonstrated that the reduced-pressure strategy leads to a remarkable increase in the extraction efficiency and reduction of the extraction time and temperature (10 min, 25 °Ï¹ vs 20 min, 40 °Ï¹). Additionally, the reduced-pressure strategy showed better analytical performances compared with those obtained by the conventional HS-SPME-GC-FID method. Limit of detections, linear dynamic ranges, and relative standard deviations of the reduced-pressure HS-SPME procedure for benzene, toluene, ethylbenzene, and xylene (BTEX) in injectable solid drugs were obtained over the ranges of 20-100 pg g-1, 0.02-40 µg g-1, and 2.8-10.2%, respectively. The procedure developed was successful for the analysis of BTEX in commercial containers of penicillin, ampicillin, ceftriaxone, and cefazolin. Graphical abstract Schematic representation of the developed RP-HS-SPME setup.

Headspace Solid-Phase Microextraction and Ultrasonic Extraction with the Solvent Sequences in Chemical Profiling of Allium ursinum L. Honey.

A volatile profile of ramson (wild garlic, Allium ursinum L.) honey was investigated by headspace solid-phase microextraction (HS-SPME) and ultrasonic solvent extraction (USE) followed by gas chromatography and mass spectrometry (GC-FID/GC-MS) analyses. The headspace was dominated by linalool derivatives: cis- and trans-linalool oxides (25.3%; 9.2%), hotrienol (12.7%), and linalool (5.8%). Besides direct extraction with dichloromethane and pentane/diethyl ether mixture (1:2, v/v), two solvent sequences (I: pentane → diethyl ether; II: pentane → pentane/diethyl ether (1:2, v/v) → dichloromethane) were applied. Striking differences were noted among the obtained chemical profiles. The extracts with diethyl ether contained hydroquinone (25.8-36.8%) and 4-hydroxybenzoic acid (11.6-16.6%) as the major compounds, while (E)-4-(r-1',t-2',c-4'-trihydroxy-2',6',6'-trimethylcyclohexyl)but-3-en-2-one predominated in dichloromethane extracts (18.3-49.1%). Therefore, combination of different solvents was crucial for the comprehensive investigation of volatile organic compounds in this honey type. This particular magastigmane was previously reported only in thymus honey and hydroquinone in vipers bugloss honey, while a combination of the mentioned predominant compounds is unique for A. ursinum honey.

Metal-organic frameworks based membranes for liquid separation.

Metal-organic frameworks (MOFs) represent a fascinating class of solid crystalline materials which can be self-assembled in a straightforward manner by the coordination of metal ions or clusters with organic ligands. Owing to their intrinsic porous characteristics, unique chemical versatility and abundant functionalities, MOFs have received substantial attention for diverse industrial applications, including membrane separation. Exciting research activities ranging from fabrication strategies to separation applications of MOF-based membranes have appeared. Inspired by the marvelous achievements of MOF-based membranes in gas separations, liquid separations are also being explored for the purpose of constructing continuous MOFs membranes or MOF-based mixed matrix membranes. Although these are in an emerging stage of vigorous development, most efforts are directed towards improving the liquid separation efficiency with well-designed MOF-based membranes. Therefore, as an increasing trend in membrane separation, the field of MOF-based membranes for liquid separation is highlighted in this review. The criteria for judicious selection of MOFs in fabricating MOF-based membranes are given. Special attention is paid to rational design strategies for MOF-based membranes, along with the latest application progress in the area of liquid separations, such as pervaporation, water treatment, and organic solvent nanofiltration. Moreover, some attractive dual-function applications of MOF-based membranes in the removal of micropollutants, degradation, and antibacterial activity are also reviewed. Finally, we define the remaining challenges and future opportunities in this field. This Tutorial Review provides an overview and outlook for MOF-based membranes for liquid separations. Further development of MOF-based membranes for liquid separation must consider the demands of strict separation standards and environmental safety for industrial application.

The Selectivity Challenge in Organic Solvent Nanofiltration: Membrane and Process Solutions.

Recent development of organic solvent nanofiltration (OSN) materials has been overwhelmingly directed toward tight membranes with ultrahigh permeance. However, emerging research into OSN applications is suggesting that improved separation selectivity is at least as important as further increases in membrane permeance. Membrane solutions are being proposed to improve selectivity, mostly by exploiting solute/solvent/membrane interactions and by fabricating tailored membranes. Because achieving a perfect separation with a single membrane stage is difficult, process engineering solutions, such as membrane cascades, are also being advocated. Here we review these approaches to the selectivity challenge, and to clarify our analysis, we propose a selectivity figure of merit that is based on the permselectivity between the two solutes undergoing separation as well as the ratio of their molecular weights.

Green and efficient extraction of rutin from tartary buckwheat hull by using natural deep eutectic solvents.

In this study, an efficient extraction technique using a combination of ultrasound and natural deep eutectic solvents (NADESs) was developed. Some basic physical properties, including viscosity, polarity, and solubility, of thirteen NADESs prepared from natural components were investigated systematically. Results show that the solubility of rutin increased in choline chloride- and glycerol-based NADESs by 660-1577times compared to water. NADESs with high rutin extractability can be designed by combining NADESs components. A maximum of 9.5mg/g rutin was extracted from tartary buckwheat hull with extraction efficiencies of 95%. NADESs can be recovered and recycled. In addition, the biocompatibility and biodegradability of the tested NADESs were also evaluated. The results demonstrated that these NADESs were excellent solvents with extremely low toxicities and favorable biodegradabilities. Our findings suggest that NADESs can be used as green solvents for the extraction of bioactive ingredients.

Enhanced solvent production by metabolic engineering of a twin-clostridial consortium.

The efficient fermentative production of solvents (acetone, n-butanol, and ethanol) from a lignocellulosic feedstock using a single process microorganism has yet to be demonstrated. Herein, we developed a consolidated bioprocessing (CBP) based on a twin-clostridial consortium composed of Clostridium cellulovorans and Clostridium beijerinckii capable of producing cellulosic butanol from alkali-extracted, deshelled corn cobs (AECC). To accomplish this a genetic system was developed for C. cellulovorans and used to knock out the genes encoding acetate kinase (Clocel_1892) and lactate dehydrogenase (Clocel_1533), and to overexpress the gene encoding butyrate kinase (Clocel_3674), thereby pulling carbon flux towards butyrate production. In parallel, to enhance ethanol production, the expression of a putative hydrogenase gene (Clocel_2243) was down-regulated using CRISPR interference (CRISPRi). Simultaneously, genes involved in organic acids reassimilation (ctfAB, cbei_3833/3834) and pentose utilization (xylR, cbei_2385 and xylT, cbei_0109) were engineered in C. beijerinckii to enhance solvent production. The engineered twin-clostridia consortium was shown to decompose 83.2g/L of AECC and produce 22.1g/L of solvents (4.25g/L acetone, 11.5g/L butanol and 6.37g/L ethanol). This titer of acetone-butanol-ethanol (ABE) approximates to that achieved from a starchy feedstock. The developed twin-clostridial consortium serves as a promising platform for ABE fermentation from lignocellulose by CBP.

Extraction and preconcentration of residual solvents in pharmaceuticals using dynamic headspace-liquid phase microextraction and their determination by gas chromatography-flame ionization detection.

The present study describes a microextraction and determination method for analyzing residual solvents in pharmaceutical products using dynamic headspace-liquid phase microextraction technique followed by gas chromatography-flame ionization detection. In this method dimethyl sulfoxide (µL level) placed into a GC liner-shaped extraction vessel is used as a collection/extraction solvent. Then the liner is exposed to the headspace of a vial containing the sample solution. The effect of different parameters influencing the microextraction procedure including collection/extraction solvent type and its volume, ionic strength, extraction time, extraction temperature and concentration of NaOH solution used in dissolving the studied pharmaceuticals are investigated and optimized. Under the optimum extraction conditions, the method showed wide linear ranges between 0.5 and 5000 mg L-1 . The other analytical parameters were obtained in the following ranges: enrichment factors 240-327, extraction recoveries 72-98% and limits of detection 0.1-0.8 mg L-1 in solution and 0.6-3.2 µg g-1 in solid. Relative standard deviations for the extraction of 100 mg L-1 of each analyte were obtained in the ranges of 4-7 and 5-8% for intra-day (n = 6) and inter-day (n = 4) respectively. Finally the target analytes were determined in different samples such as erythromycin, azithromycin, cefalexin, amoxicillin and co-amoxiclav by the proposed method.

A Simple Method for Automated Solid Phase Extraction of Water Samples for Immunological Analysis of Small Pollutants.

A new method for solid phase extraction (SPE) of environmental water samples is proposed. The developed prototype is cost-efficient and user friendly, and enables to perform rapid, automated and simple SPE. The pre-concentrated solution is compatible with analysis by immunoassay, with a low organic solvent content. A method is described for the extraction and pre-concentration of natural hormone 17ß-estradiol in 100 ml water samples. Reverse phase SPE is performed with octadecyl-silica sorbent and elution is done with 200 µl of methanol 50% v/v. Eluent is diluted by adding di-water to lower the amount of methanol. After preparing manually the SPE column, the overall procedure is performed automatically within 1 hr. At the end of the process, estradiol concentration is measured by using a commercial enzyme-linked immune-sorbent assay (ELISA). 100-fold pre-concentration is achieved and the methanol content in only 10% v/v. Full recoveries of the molecule are achieved with 1 ng/L spiked de-ionized and synthetic sea water samples.

Synthesis of Tertiary and Quaternary Amine Derivatives from Wood Resin as Chiral NMR Solvating Agents.

Chiral tertiary and quaternary amine solvating agents for NMR spectroscopy were synthesized from the wood resin derivative (+)-dehydroabietylamine (2). The resolution of enantiomers of model compounds [Mosher's acid (3) and its n-Bu4N salt (4)] (guests) by (+)-dehydroabietyl-N,N-dimethylmethanamine (5) and its ten different ammonium salts (hosts) was studied. The best results with 3 were obtained using 5 while with 4 the best enantiomeric resolution was obtained using (+)-dehydroabietyl-N,N-dimethylmethanaminium bis(trifluoromethane-sulfonimide) (6). The compounds 5 and 6 showed a 1:1 complexation behaviour between the host and guest. The capability of 5 and 6 to recognize the enantiomers of various α-substituted carboxylic acids and their n-Bu4N salts in enantiomeric excess (ee) determinations was demonstrated. A modification of the RES-TOCSY NMR pulse sequence is described, allowing the enhancement of enantiomeric discrimination when the resolution of multiplets is insufficient.

Robustness of steady state recycling chromatography with an integrated solvent removal unit.

The robustness of a hybrid separation process where the performance of mixed-recycle steady state recycling chromatography is enhanced by integrating it with a solvent removal unit is analysed theoretically and by means of numerical simulations. The equilibrium theory of chromatography is applied to derive equations for boundaries of feasible operating parameters in such a hybrid process. Visualization of the feasible operating parameter ranges helps in analysing the influence of various physical and process parameters of robustness of an operating point. It is observed that process robustness can be improved by adjusting the solvent removal capacity or the cut times. When the solvent removal capacity increases, the region of feasible cut times becomes narrower due to increased non-linearity of the system. This makes it more difficult to maintain robust operation.

Solvent/detergent-treated plasma: a tale of 30 years of experience.

Solvent/detergent-treated plasma was licensed >30 years ago. It has several specific characteristics, the most important being the standardized content of clotting factors, the lack of antibodies implicated in transfusion-related acute lung injury pathogenesis and the very high level of safety against transfusion-related viral infections. Since 1992, many clinical studies have confirmed its safety and efficacy in a wide range of congenital and acquired bleeding disorders. After a brief analysis of the pharmaceutical characteristics of solvent/detergent plasma, this review will focus on the clinical experience with this virus-inactivated plasma.

Amine reclaiming technologies in post-combustion carbon dioxide capture.

Amine scrubbing is the most developed technology for carbon dioxide (CO2) capture. Degradation of amine solvents due to the presence of high levels of oxygen and other impurities in flue gas causes increasing costs and deterioration in long term performance, and therefore purification of the solvents is needed to overcome these problems. This review presents the reclaiming of amine solvents used for post combustion CO2 capture (PCC). Thermal reclaiming, ion exchange, and electrodialysis, although principally developed for sour gas sweetening, have also been tested for CO2 capture from flue gas. The three technologies all have their strengths and weaknesses, and further development is needed to reduce energy usage and costs. An expected future trend for amine reclamation is to focus on process integration of the current reclaiming technologies into the PCC process in order to drive down costs.